Restoring The Original Functions Of Your Remote Control - Philips SRM 5100 User Manual

SRM5100_Def 31-05-2007
Example: In STB mode you want to operate the amplifier/receiver volume
control
1
Keep keys 1 and 6 on the SRM 5100
pressed simultaneously for three seconds,
until the STB LED flashes twice and then
remains lit.
2
Press keys 9, 9 and 3 in that order.
– The STB LED flashes twice and then remains
lit.
3
Press the MODE key to select STB.
Press the key until the STB LED lights up.
4
Press the OK key.
5
Press the MODE key to select AMP.
Press the key until the AMP LED lights up.
6
Press the OK key.
– The AMP LED flashes twice to confirm the
new setup.You can now use the AMP volume
controls in STB mode.
Restoring the original functions of your remote
control
1
Keep keys 1 and 6 on the SRM 5100
pressed simultaneously for three seconds,
until one of the LEDs (PC,TV, STB, AMP)
lights up.
2
Press keys 9, 8 and 1, in that order.
– The LED flashes twice. All original functions
have now been restored and any extra
functions have been deleted.
16:43 Pagina 11
Instructions for use
11