Summary of Contents for WALTHER PILOT PILOT WA 450
Page 1
WALTHER PILOT Betriebsanleitung / Operating Instructions Automatische Spritzpistolen / Automatic Spray Gun PILOT WA 450 / PILOT WA 451 / PILOT WA 452 / PILOT WA 453 REV. 01/12 DISTRIBUTED BY COATING EQUIPMENT TECHNOLOGY, INC PHONE: 586-210-0555 WEB: www.cetinc.com...
Ersatzteilliste: Ersatzteilliste: WA 450 WA 451-U WA 452 HVLP WA 453 HVLP-U V 20 545 V 20 546 V 20 547 V 20 548 Pos. Bezeichnung Stck. Artikelnummer Stck. Artikelnummer Pos. Bezeichnung Stck. Artikelnummer Stck. Artikelnummer Luftkopfmutter V 11 360 04 300 V 11 360 04 300 Luftkopfmutter V 11 360 04 300...
Beizen Sind die Materialien, die Sie verspritzen wollen, hier nicht aufgeführt, wenden Sie Die Modell PILOT WA 450, WA 451, WA 452 und WA 453 arbeiten automatisch über sich bitte an WALTHER Spritz- und Lackiersysteme GmbH, Wuppertal. eine Druckluftsteuerung und werden über 3/2-Wege-Steuerventile angesteuert.
Verwenden Sie nur Original-Ersatzteile, da WALTHER nur für diese eine sichere Sicherheitshinweise und einwandfreie Funktion garantieren kann. Kennzeichnung der Sicherheitshinweise Bei Nachfragen zur gefahrlosen Benutzung der Spritzpistole wenden Sie sich bitte Warnung an WALTHER Spritz- und Lackiersysteme GmbH, D-42327 Wuppertal. Das Piktogramm und die Dringlichkeitsstufe „Warnung“...
Verspritzen leicht entzündbarer Materialien (z. B. Lacke, Kleber) besteht Spritzbild verändern erhöhte Explosions- und Brandgefahr. Sie können an der PILOT WA 450, WA 451, WA 452, WA 453 durch die folgenden Einstellungen das Spritzbild verändern. Inbetrieb- und Außerbetriebsetzen Spritzluft einstellen Bevor Sie die Spritzpistole in Betrieb setzen können, müssen folgende Voraus-...
Mängel eines Spritzbildes beheben Materialdüse und Materialnadel wechseln Entfernen Sie den Luftkopf (siehe 5.5 Luftkopf wechseln). Die folgende Tabelle zeigt Ihnen, mit welchen Einstellungen Sie das Spritzbild Schrauben Sie die Materialdüse (Pos. 3) aus dem Vorderteil (SW 13). beeinflussen können. Entfernen Sie die Dichtscheibe (Pos.
Damit nicht die gesamte Spritzanlage in Betrieb gesetzt werden muss, können Sie • Druckfeder des Kolbens die Materialzufuhr der PILOT WA 450, WA 451, WA 452, WA 453 auch von Hand • Materialnadel* entsperren. Die gesamte Spritzanlage sollte nun bis zum nächsten Einsatz druck- •...
Fett eingefettet werden. Gewicht: 600 gr WALTHER Spritz- und Lackiersysteme hält für die Automatik-Spritzpistolen PILOT WA 450, WA 451, WA 452, WA 453 Reparatursets bereit, die sämtliche Anschluss: Verschleißteile enthalten: Rundstrahlluft: 1/8“ PK 6 Breitstrahlluft: 1/8“...
Identification of Model Version Fax: +49(0)202 / 787 - 2217 www.walther-pilot.de • e-mail: info@walther-pilot.de Normal Use Improper Use Type Designation Automatic Spray Guns PILOT WA 450 PILOT WA 450 (Standard version) V 20 545 Technical Description PILOT WA 451-U (Circulation version)
Page 12
Replacements parts: Replacements parts: WA 450 WA 451-U WA 452 HVLP WA 453 HVLP-U V 20 545 V 20 546 V 20 547 V 20 548 Pos. Description Stck. Part No. Stck. Part No. Pos. Description Part No. Qty. Part No. Air cap nut V 11 360 04 300 V 11 360 04 300...
- in sequence - the atomizing air (round - and wide/flat air) and the PILOT WA 450, WA 451, WA 452 and WA 453 are not designed for manual ope- material input.The control air, round jet and wide/flat jet are adjusted external by ration, and must be installed in a suitable gun mounting device.
Safety instructions fault-free operation for original parts. Identification of safety instructions For further information on the safe use of the spray gun and the spraying materials, please contact WALTHER Spritz- und Lackiersysteme GmbH, D-42327 Wuppertal, Warning Germany. The pictogram and the urgency level “Warning“ identify a possible danger to per- sons.
Spray Pattern Adjustments The spray pattern of the PILOT WA 450, WA 451, WA 452 and WA 453 can be Starting / Stopping Requirements adjusted as follows:...
Correction of Spray Pattern Imperfections Replacement of Material Nozzle and Needle Remove the air cap (see 5.5 Replacement of Air Cap). The following table shows how to correct a defective spray pattern. Unscrew the material nozzle (pos. 3) from the gun body (pos. 6). Remove the sealing washer (pos.4) and the air distribution ring in (pos.
• Material nozzle • Piston spring The material supply of the PILOT WA 450, WA 451, WA 452 and WA 453 can be • Material needle* manually released so that it is not necessary to operate the complete spraying •...
Note Technical Data Parts marked with * must be lubricated with non-acidic, non-resinogenic grease prior to installation. WALTHER PILOT repair kits are available for PILOT WA 450, Gewicht: 600 gr WA 451, WA 452 and WA 453 spray guns including all wearing parts: Weight: Article No.: V 16 545 06 .
Page 19
Das WALTHER PILOT- The WALTHER PILOT Programm Programme • Hand-Spritzpistolen • Hand-Held Spray Guns • Automatik-Spritzpistolen • Automatic Spray Guns • Niederdruck-Spritzpistolen • Low Pressure Spray Guns (System HVLP) (System HVLP) • Zweikomponenten- • Two-Component Spray Guns Spritzpistolen • Material Pressure Tanks •...