Handling And Storage; Handling; Storage; Installation - Saeco Lirika User Manual

8 HANDLING AND

STORAGE

All the operations described in chapter 8 must
be performed exclusively by the service provider
or a specialised technician, who shall organise
all the operating steps and use only suitable means to en-
sure strict compliance with the safety regulations in force.
8.1

Handling

During handling and transportation, the machine must be kept in
an upright position, according to the instructions printed on the
packaging. Care should be taken during lifting and positioning.
Do not shake the machine.
Make sure that nobody is standing in the area
during load lifting and handling. In diffi cult con-
ditions, assign suitable personnel to monitor all move-
ments.
8.2 Storage
The machine should be stored in accordance with the following
conditions:
- Minimum temperature: above 4°C;
- Maximum temperature: below 40°C;
- Maximum humidity: below 95%.
The machine is packed in cardboard and expanded polystyrene
packaging.
Warning. Due to the total weight of the packaged
product, do not stack more than three machines
on top of each other. The machine should be stored in its
original packaging, in a dry and/or dust-FREE place.
Machine Installation - Service Provider Manual
9

INSTALLATION

All the operations described in chapter 9 must
be performed exclusively by the service provider
or a specialised technician, who shall organise
all the operating steps and use only suitable means to en-
sure strict compliance with the safety regulations in force.
9.1

Safety Instructions

• Read the entire instruction manual care-
fully.
• The machine should be connected to the
mains according to the safety regulations
in force in the country where the machine
is used.
• Connection to the drinking water network
(for water-network supplied machines)
should be made in compliance with the
safety regulations in force in the country
where the machine is to be used.
• The socket to which the machine is con-
nected should be:
- compatible with the type of plug in-
stalled on the machine;
- suitably sized to comply with the data
on the plate attached to the bottom of
the appliance;
- connected to an effi cient earthing sys-
tem.
• The power cord should not:
- come into contact with any type of
liquid: danger of electric shocks and/or
fi re;
- be crushed and/or come into contact
with sharp surfaces;
- be used to move the machine;
• 33 •