Adjusting Latte Macchiato - Saeco Lirika User Manual

4 Insert the suction tube into the milk container.
Caution:
For hygienic reasons, make sure that the outer
surface of the suction tube is clean.
5 Place a cup under the Cappuccinatore.
Press the " " button (18) to start dispensing.
6
7 The machine requires some preheating time.
8 Once preheating has been completed, the machine starts
dispensing frothed milk directly into the cup.
Machine Use - User Manual
9 Press the " " button (18) to stop frothed milk dispensing.
10 Once frothed milk has been dispensed, the machine brews
coff ee.
Brewing can be stopped by pressing the "

3.16 Adjusting Latte Macchiato

Each time the " " button (23) is pressed, the machine dispenses
a pre-set quantity of Latte Macchiato into the cup.
The machine allows you to adjust the dispensed amount of Latte
Macchiato according to your taste and the size of your cups.
1 Fill 1/3 of a container with cold milk.
Press and hold the " " button (23) until the following screen
2
is displayed:
Note: this screen stays active for 30 seconds, then
the machine goes back to the main screen.
The machine is now in programming mode.
3 Insert the suction tube into the milk container.
" button (18).
• 17 •