Table of Contents
Advertisement
Machine Use - User Manual
4
Press and hold the "
" button (19) until the following
screen is displayed:
The machine is now in programming mode.
5
Insert the suction tube into the milk container.
6
Place a cup under the Cappuccinatore.
7
Press the "
" button (18) to start dispensing.
8
The machine requires some preheating time.
9
The machine starts dispensing frothed milk into the cup.
10
When the desired quantity of frothed milk is reached, press
the "
" button (18).
The
button is now programmed. Every time it is pressed, the
machine will dispense the same amount of frothed milk that was
programmed.
• 20 •
3.19 Dispensing Hot Water
Danger of burning! Dispensing may be preceded
by small jets of hot water and steam. Wait until
the end of the cycle before removing the water dispens-
ing spout.
1
Slightly tilt the water dispensing spout and insert it all the
way into the guides of the machine.
2
Push the water dispensing spout towards the bottom while
rotating it until it is locked onto the machine as shown in the fi g-
ure.
3
Place a container under the hot water dispensing spout
(Fig.10, page 3).
4
Press the " " button (24). The following screen is displayed:
Hide quick links:
Advertisement
Table of Contents
