Saeco Lirika User Manual page 49

3 Place a large container (1.5 l) under the Cappuccinatore.
Note: Use a container of at least 1.5-litre capacity.
4 Switch to programming mode as described in section 10.1.
5 Press the " " button (24) until the following menu is dis-
played:
Press the " " button (18) to start the DESCALING cycle.
6
Note: Press the " " button (22) to exit. You can
quit the cycle in any case; see the "Interruption of
the Descaling Cycle" chapter.
7 Pour the entire content of the Saeco concentrated descaling
solution into the water tank.
Machine Installation - Service Provider Manual
8 Fill with fresh drinking water up to the level marked by the
"CALC CLEAN" icon.
9 Put the tank back in the machine.
10 Drain any liquids from the drip tray and place it back into the
machine (see section 6.3).
11 Press the "
If you do not have a container of this capacity,
pause the cycle by pressing the "
empty the container, place it back into the machine and
restart the cycle by pressing the "
" button (18) to start the descaling cycle.
" button (18),
" button (18).
• 49 •