Kyocera Fax System (U) Service Manual page 37

Item No.
U631 Setting communication control 2
Description
Makes settings regarding fax transmission.
Method
1. Press the start key.
2. Select the item to be set.
ECM TX
ECM RX
CED Freq
Setting ECM transmission
To be set to Off when reduction of transmission costs is of higher priority than image quality.
This should not be set to Off when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Setting ECM reception
To be set to Off when reduction of transmission costs is of higher priority than image quality.
This should not be set to Off when connecting to the IP (Internet Protocol) telephone line.
1. Select the setting.
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Setting the frequency of the CED signal
Sets the frequency of the CED signal. Used as one of the measures to improve transmission per-
formance for international communications.
1. Select the setting.
2100
1100
* : Initial setting: 2100
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Sets ECM transmission.
Sets ECM reception.
Sets the frequency of the CED signal.
Display
ECM transmission is enabled.
ECM transmission is disabled.
Display
ECM reception is enabled.
ECM reception is disabled.
Display
2100 Hz
1100 Hz
Description
Description
Description
Description
Description
1-3-15
5JR