Kyocera Fax System (U) Service Manual page 27

Item No.
U601 Initializing permanent data
Description
Initializes software switches on the FAX control PWB according to the destination and OEM.
Purpose
To initialize the FAX control PWB without changing user registration data.
Method
1. Press the start key.
2. Select [Country Code] and enter a destination code using the numeric keys.
Refer to the destination code list on page 1-3-4 for the destination code.
OEM code is no operation necessary.
3. Select [Execute].
4. Press the start key. Data initialization starts. To cancel data initialization, press the back key.
5. After data initialization, ROM version are displayed.
A ROM version displays three kinds, application, boot, and IPL.
U603 Setting user data 1
Description
Makes user settings to enable the use of the machine as a fax.
Purpose
To be executed as required.
Setting
1. Press the start key.
2. Select [Line Type].
3. Select the setting.
DTMF
10PPS
20PPS
* : Initial setting: DTMF
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
DTMF
10 PPS
20 PPS
Description
Description
1-3-5
5JR