Operation Mode When Shipped - Panasonic FP3 Technical Manual

Selector number 4:
Example:

2) Operation mode when shipped

The operation mode selector numbers of the slave station (FP I/O transmitter unit) are all set to the OFF position when
shipped.
Operation mode setting of the FP I/O transmitter unit when shipped:
- The setting disallows the use of the unit as a slave station of a MEWNET-TR system.
- When the transmission cable disconnects during output operation, the output turns OFF.
- The unit is not set for use as the terminal station.
Terminal station setting of the slave station
Set the selector to ON when the slave station is the terminal station, and set it to OFF when
the slave station is not the terminal station.
Terminal station
Master
Slave
station
station 1
4-1. Operation Mode Setting
Because neither slave station 1 nor 2 is the terminal
station, set selector number 4 of these units to OFF.
Terminal station
Slave Slave
station 2 station 3
Because slave station 3 is the
terminal station, set selector
number 4 of this unit to ON.
53