Panasonic FP3 Technical Manual page 24

2-3. Slave Stations
J Operation monitor LEDs
LED
POWER ON:
OFF:
COM. Flashing:
ON:
OFF:
ALARM ON:
OFF:
J Operation mode selector setting
Selector Selector
Function Function
number
1 Communication
mode selection ode selectio
2 System configuration
selection
3 Output operation
condition during condition during
a communication error
4 Terminal station setting
Notes:
The operation mode selectors are all set to the OFF position when shipped.
The operation mode selector's upper state is "ON (
Be sure the power is OFF when changing the switch position.
18
Power is supplied.
Power is not supplied.
Normal communication status (flashes in approx. 0.2 s intervals)
Waiting for communication
A communication error
Error at FP I/O transmitter unit
Normal
Description Description
(1:1) × n communication
1:1 communication
This unit is regarded as a slave
station.
This unit is not regarded as a slave
station.
Hold (continues I/O communication)
Output OFF
Terminal station
Not a terminal station
Description
1
ON
OFF
)" and the lower state is "OFF (
1 2 3 4
ON
OFF
Selector position
2 3 4
ON
OFF
ON
OFF
ON
OFF
)."