Adding Measurement Comments - Cygnus M5-C4P Operating Manual

M5-CYG4P-M-01_Iss5.doc
5. ..these boxes will fill clockwise
with the Radial Points
measurements as they get
logged
6.
When the last Radial Point has
been logged the screen will
revert back to the normal data
logging view.
A small 'R' is added to the
measurement point to show it
has Radial Points added.

Adding Measurement Comments

You can add comments to ANY measurement point in the current
Record, this includes Radial Points also.
1.
Access the Menu and scroll down
to the 'Data Logging' group.
Then scroll right and select
'Comment'.
Press the √ key to select
Cygnus 4+ Operating Manual
77