PRODUCT SPECIFICATIONS
•
This appliance has been certified for use with either natural or propane gas. See appropriate data plates.
•
This appliance is not for use with solid fuels.
•
The appliance is approved for bedroom or bedsitting room installations.
•
The appliance must be installed in accordance with local codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in Canada.
•
This appliance is mobile home approved.
•
This appliance is approved for bathroom installation.
•
The appliance must be properly connected to a venting system.
•
The appliance is not approved for closet or recessed installations.
The efficiency rating of this appliance is a product thermal efficiency rating determined under continuous operat-
ing conditions and was determined independently of any installed system.
FP2034
53D0419
PRODUCT FEATURES
Thermal Efficiency = up to 80%
Blower Control
Figure 1 -
Designer Fireplace
FP2034
Design controls
10/08
CODE APPROVAL
and
Optional Remote Receiver
Hi/Lo Knob
Off/Pilot/On Knob
On/Off/RS Switch
Control Panel
5