Chapter 2 Preparations
1.2
Anti-static Measures
The workstation contains electronic components sensitive to static electricity. Avoid failures caused by static
electricity when installing or removing any optional devices.
•
Wear a wrist strap (an arm belt or anti-static glove).
Wear a wrist strap on your wrist. If no wrist strap is available, touch an unpainted metal part of the cabinet
before touching a component to discharge static electricity from your body.
Touch a metal part regularly when working with components to discharge static electricity.
•
Select a suitable work space.
Work with the workstation on the anti-static or concrete floor.
–
–
When you work with the workstation on a carpet where static electricity is likely to be generated, make
sure take anti-static measures beforehand.
•
Use a work table.
Place the workstation on an anti-static mat to work with it.
•
Clothe
Do not wear a wool or synthetic cloth to work with the workstation.
–
Wear anti-static shoes to work with the workstation.
–
–
Take off any jewels (a ring, bracelet, or wrist watch) before working with the workstation.
•
Handling of components
Keep any component in an anti-static bag until you actually install it to the workstation.
–
Hold a component by its edge to avoid touching any terminals or components.
–
–
To store or carry any component, place it in an anti-static bag.
50
Express5800/53Xi, Y53Xi User's Guide
1. Installing Internal Options