Attaching The Canopy - Be Cool ZAS Instructions Manual

GB
ASSEMBLING YOUR STROLLER
OPENING THE STROLLER
1
Unlock the fold latch A.
Grab the parent's handle B and pull upward until the
stroller opens fully with an audible click. Make sure the
stroller locks in the open position.
WARNING Fasten the safety strap, under the folding
device, before use. Lift and shake the stroller to make
sure it is locked completely.
FRONT WHEELS ASSEMBLY
2
Front wheel assembly C into the front frame leg D until it locks into place with an audible click.
CAUTION To remove swivel wheels, press locking tab and slide the wheel off the leg.
3 REAR WHEELS ASSEMBLY
Install the rear wheels E on the rear axle assembly F.
Make sure each wheel locks into position with an audible click. Pull the rear wheels to make
sure they are locked securely.
* Not available on all models.

ATTACHING THE CANOPY

4
Install a canopy pivot G into each canopy mount H until it locks into place. Pull upward on the
canopy to make sure it is securely installed.
Fasten the velcro located on both sides.
5 ATTACHING THE GUARDRAIL
Install the child's tray I onto the tray mounts J.
Make sure the tray locks into position with audible clicks. Pull on the child's tray to make sure
it is locked into place.
CAUTION Pull on each side of the tray to make sure it is completely attached.
LEG REST ADJUSTMENT
6
1. Pull up the leg rest to horizontal position.
2. Pull adjust tab forward to release leg rest to lower position.
USING YOUR STROLLER
USING THE BRAKES
7
Step on the rear brake levers A to lock the rear wheels on the stroller.
To release the brakes, lift up on the brake levers.
CAUTION Always engage the brakes on the side of handle when parking the stroller.
Push the stroller forward to ensure that the brakes are properly engaged.
* Not available on all models.
USING THE SWIVELS WHEELS
8
Some models feature swivel locks that improve handling over rough ground.
To keep wheels from swiveling, pull up on the swivel lock levers B.
Push down the swivel locks to restore the swivel action.
USING THE RECLINING BACKREST
9
To recline seat, press the strap release button on the adjuster C and allow seat to recline.
To raise the seat, hold the D-ring D, then press the release button and slide the adjuster C
toward the seat.
WARNING To avoid serious injury, DO NOT raise or recline seat with child in stroller.
USING THE GUARDRAIL
10
To open the guardrail E, pull a locking tab F on either side of the guardrail.
CAUTION You can open the guardrail from either side.
14
To remove the guardrail E, pull both tabs and remove the guardrail from the stroller.