Cycle Guide - Whirlpool W10562346B Use And Care Manual

CYCLE GUIDE -- SENSOR CYCLES
Not all cycles and settings are available on all models.
SENSOR CYCLES - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Temp: D ness
. Level:
Jeans, heaw work
clothes, towels
Sensor
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
High
Less Dry
Normal
More Dry
-'-'-Available
Options:
Less Dry
Normal
More Dry
WrinkleShield
TM
Cycle Signal
Work clothes, medium Sensor Medium Less Dry Wrinkle Shield
TM
weight fabrics, sheets Normal Cycle Signal
More Dry
Sensor Low Wrinkle Shield
TM
Cycle Signal
Cycle Details:
Gives the best drying in the shortest time.
Drying time varies based on fabric type,
load size, and dryness setting.
Select a drying temperature based on
the fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE -- TIMED DRY
Not all cycles and settings are available on all models.
TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
_ Items to Cycle: I Drying Available
I
Cycle Details=
Temperature: Options:.
Any load
Rubber, plastic, heat
sensitive fabrics
Timed Dry
Timed Dry
Wrinkle
Shield
TM
Any
Air Dry
No heat
Temp
Wrinkle Shield
TM
Temp
Wrinkle Shield
TM
N/A
Any load
Dries items to a damp level for items that
do not require an entire drying cycle.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Use an air dry (no heat) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
After a cycle is complete, the load is
periodically tumbled to avoid wrinkles until
you are ready to remove it.
Setting the Drying Temperature
If your dryer has multiple heat settings:
[] A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
[] A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
[] Use an air dry (no heat) setting for foam, rubber, plastic, or
heat-sensitive fabrics.
[] Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
6