CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow
these instructions can result in death
Good Air Flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying
times and improve your energy savings. See Installation
The venting system attached to the dryer plays a big role in
good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.
Cleaning your lint screen before each load.
Replace plastic or foil vent material with 4" (102 mm)
diameter heavy, rigid vent material.
Use the shortest length of vent possible.
Use no more than four 90 ° elbows in a vent system;
each bend and curve reduces air flow.
Remove lint and debris from the exhaust hood.
Remove lint from the entire length of the vent system at
least every 2 years. When cleaning is complete, be sure
to follow the Installation Instructions supplied with your
dryer for final product check.
Clear away items from the front the dryer.
Use Sensor Cycles for Better Fabric Care and Energy Savings
Use the Sensor Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Cycles, drying
and moisture level are sensed in the load. This sensing occurs throughout
the drying cycle and the dryer shuts
off when the load reaches the selected dryness. With Timed Dry, the dryer runs the amount of time set and sometimes results in
shrinkage, wrinkling, and static due to over-drying.
Use Timed Dry for the occasional damp load that needs a little more drying
time or when using the drying rack.