Whirlpool W10562346B Use And Care Manual page 8

4. Select the desired cycle
NORMAL
LESS DRY MORE DRY
7O
_medD_
lO
60 20
5( I0
4O
Wet Damp Cool Done Wrinkle
Down Shield
Select the desired cycle for your load. See the Cycle Guide
or the display for more information about each cycle.
5. Set cycle settings
High
Medium
Temp
8On 0On
Wrinkle Cycle
Shield Signal
The default cycle settings will be shown. For some cycles,
you may select alternate settings by pressing the button for
that setting. Time adjusts for Manual Cycles only.
NOTE: Not all options and settings are available with all cycles.
Temp
Press the TEMP button to change the drying temperature
from the default setting.
Wrinkle Shield
TM
feature
[] Get up to 90 minutes of heat-free, periodic tumbling at the
end of a cycle. Press the WRINKLE SHIELD
TM
button to turn
ON or OFF at any time before the cycle has ended.
[] The WRINKLE SHIELD
TM
feature is preset to "OFE" If
selected for other cycles, the WRINKLE SHIELD
TM
feature
setting will remain "ON" the next time that cycle is selected.
f6. Select cycle options (if desired) _'_
0On
O
Cycle
Signal
Add additional options by pressing the button.
NOTE: Not all options and settings are available with all
cycles.
fT. Press START/PAUSE to begin cycle
C3
START
Pause
Press the START/PAUSE button to begin the cycle.
8. Remove garments promptly
after cycle is finished
0On
Wrinkle
Shield
Promptly remove garments after cycle has completed to
reduce wrinkling. If you are unable to remove the load
promptly, press the Wrinkle Shield button to turn ON or
OFF at any time before the cycle has ended.
8