Docomo SH-02B Instruction Manual page 39

Changing network security code
1
[iMenu]/[お客様サポート]/[各種設定 (確
認 ・ 変更 ・ 利用)]/[ネットワーク暗証番号変更]
i-mode password
[0000] is set at the time of subscription but you can
change the password.
A four-digit "i-mode password" is required to register/delete
sites in マイメニュー (My menu), or subscribe/cancel
message services and charged i-mode services (Additionally,
information providers may set their own passwords).
Changing i-mode password
1
[iMenu]/[English]/[Options]/[Change
i-mode Password]
PIN1 code/PIN2 code
[0000] is set at the time of subscription but you can
change the code.
You can set two security codes, PIN1 code and PIN2 code,
on the FOMA card.
The PIN1 code is a four- to eight-digit security code that is
entered when a FOMA card is inserted or when the FOMA
terminal is turned on to prevent unauthorized use by a third
party. Enter the PIN1 code to enable making/receiving calls
and operating the handset. The PIN2 code is four- to eight-digit
security code that is entered for performing operations such as
resetting total cost or using client certificates, or applying for.
Changing PIN1 code/PIN2 code
1
][Settings]/[Security]/[UIM
Settings]/enter the terminal security
&
code/t
2
Select the PIN1 or PIN2
3
Enter the current PIN
4
Enter the new PIN
new PIN code again/t
PUK
The code is described in the agreement form (customer
copy) you received at the time of subscription. You cannot
change the code.
PUK is an eight-digit number used to disable the PIN1/PIN2
code lock.
If you enter the wrong code ten times continuously, the
FOMA card is completely locked. In this case, contact a
docomo Shop.
&
code/t
&
code/t
& /enter the
code/t
&
37