Docomo SH-02B Instruction Manual page 36

Changing illumination LED for
incoming calls
1
][Settings]/[Disp/LED/Power
saver]/[LED settings]/[Called LED]
2
Select an item/t
3
Select the [Settings]
If you change the [Settings] field to [Original] when the
called LED is set to the Kisekae tool, you can set the
LED color or LED pattern.
4
Select the [LED color]
the LED color/t
5
Select the [LED pattern]
the LED pattern/t
Checking missed calls or new
mails with LED
LED flashes at approximately 4-seconds intervals and
notify you of missed calls and new mails.
1
][Settings]/[Disp/LED/Power
saver]/[LED settings]/[Notice LED]
2
Select an item/t
34
&
& /[Original]
field/t
& /select
field/t
&
& /select
field/t
& /i
& /[ON]
Saving power consumption
Norm This is normal light setting. Brightness is
(auto bright) automatically adjusted.
Norm This is normal light setting. Brightness is
(fixed bright) fixed.
Eco mode This is power saver mode.
(Pwr saver)
Original You can change settings for light
Eco mode duration, brightness, etc. of display.
1
][Settings]/[Disp/LED/Power
saver]/[Light/Power saver]
2
&
Select the type/t
^s (for 1+
seconds)/[Yes] to set the
eco mode (Power saver).