Docomo SH-02B Instruction Manual page 112

1
Insert the accompanying CD-ROM
into your PC.
: The initial screen appears.
2
Click [データリンクソフト・各種設定
ソフト] (Data link software/Setting
software) b [Windows
Vista (32ビット版) 用] (For
Windows ® 2000/XP/Vista (32 bit
version)) in the [FOMA通信設定ファ
イル (USBドライバ)] (FOMA
communication configuration file
(USB driver)) field.
For Windows Vista (64 bit version)
: Click [Windows
® Vista (64ビット版) 用] (For
Windows ® Vista (64 bit version)).
®
2000/XP/
5
3
Double-click [SH02Bs.exe].
4
Click [インストール開始] (Start
install).
5
Connect the FOMA terminal to your
PC via FOMA USB Cable with
Charge Function 02 when [FOMA
SH02BとPCをFOMA USB接続ケーブ
ルにて接続してください。 ] (Connect
the FOMA SH02B to your PC via
FOMA USB Cable.) appears.
: The installation in progress screen appears and
installation automatically begins.
: Connect the FOMA terminal while the power is on.
6
Click [OK] when [FOMA SH02Bドラ
イバのインストールが完了しました。 ]
(Installation of FOMA SH02B driver
is completed.) appears.
: Installation of the FOMA communication
configuration file finishes.
Installation may take a few minutes.
When a message prompting to restart the PC
appears, follow the instruction and restart.
When [他のデバイスドライバのインストールが終了
後に再度インストーラを実行してください。] (Run
the installer again after other device drivers are
installed) appears, uninstall other drivers
automatically installed and install the driver. Refer to
"Uninstalling FOMA communication configuration file
(Driver)" for steps on uninstalling.