Interfaces - Linksys LGS308 User Manual

Interfaces

The Interface Settings page displays and enables configuration of VLAN-related parameters for
all interfaces.
To configure the interface settings:
1. Click VLAN Management > Interface Settings.
2. Select an interface type (Port or LAG), and click Search. Ports or LAGs and their VLAN
Membership are displayed.
3. To configure a Port or LAG, select it and click Edit.
Note—To add a port or LAG to a VLAN, click Join VLAN. The Join VLAN page is displayed.
4. Enter the values for the following fields:
Interface—Select a Port/LAG.
•
• Interface VLAN Mode—Select the interface mode for the VLAN. The options are:
- Access—The interface is an untagged member of a single VLAN. A port
configured in this mode is known as an access port.
- Trunk—The interface is an untagged member of one VLAN at most, and is a
tagged member of zero or more VLANs. A port configured in this mode is
known as a trunk port.
- General Port—The interface can support all functions as defined in the
IEEE 802.1q specification. The interface can be a tagged or untagged
member of one or more VLANs.
81