Window Navigation; Application Header - Linksys LGS308 User Manual

Logging Out
By default, the application logs out after ten minutes of inactivity.
CAUTION
Unless the Running Configuration is copied to the Startup Configuration, rebooting the
device will remove all changes made since the last time the file was saved. Save the
Running Configuration to the Startup Configuration before logging off to preserve any
changes you made during this session.
When you click Quick Start > Save Your Configurations, the Configuration File Copy page
appears. Save the Running Configuration file by copying it to the Startup Configuration
file.
To log out, click Logout in the top right corner of any page. The system logs out of the device.
NOTE—When a timeout occurs or you intentionally log out of the system, a message appears,
and the login page appears with a message indicating the logged-out state.
Interface Naming Conventions
Within the GUI, interfaces are denoted by linking the following elements:
• Type of interface: The following types of interfaces are found on the switch:
Gigabit Ethernet ports (displayed as GE).
o
LAG (Port Channel) (displayed as LAG).
o
VLAN
o
Interface Number: Port, LAG or VLAN ID
•

Window Navigation

This section describes the features of the Web-based switch configuration utility.

Application Header

The Application Header appears on every page. It provides the following application links:
Application Link Name
Logout
Firmware Version
Help
Description
Click to log out of the Web-based switch configuration utility.
Display the device version number.
Click for the link to this administration guide.
6