Table of Contents
Advertisement
•
Filter Name—Select the SNMP filter that defines the information contained in
traps (defined in the Notification Filter page).
3. Click Apply. The SNMP Notification Recipient settings are written to the Running
Configuration file.
V3 Notification Recipients
To define a recipient in SNMPv3:
1. Click SNMP > Notification Recipients SNMPv3.
This page displays recipients for SNMPv3.
2. Enter the fields:
•
IP Version—Select either IPv4 or IPv6.
•
IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The options are:
•
Link Local Interface—Select the link local interface (if IPv6 Address Type Link
Local is selected) from the pull-down list.
•
Recipient IP Address/Name—Enter the IP address or server name of where the
traps are sent.
•
UDP Port—Enter the UDP port used to for notifications on the recipient device.
o Link Local—The IPv6 address uniquely identifies hosts on a single network
link. A link local address has a prefix of FE80, is not routable, and can be
used for communication only on the local network. Only one link local
address is supported. If a link local address exists on the interface, this
entry replaces the address in the configuration.
o Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
43
Hide quick links:
Advertisement
Table of Contents
