Linksys LGS308 User Manual page 131

• Prefix Length—The length of the Global IPv6 prefix is a value from 0-128
indicating the number of the high-order contiguous bits of the address that
comprise the prefix (the network portion of the address).
EUI-64—Select to use the EUI-64 parameter to identify the interface ID portion of
•
the Global IPv6 address on a device MAC address.
5. Click Apply. The Running Configuration file is updated.
IPv6 Default Routers
The IPv6 Default Routers page enables configuring and viewing the default IPv6 router
addresses. This list contains the routers that are candidates to become the device default router
for nonlocal traffic (it may be empty). The device randomly selects a router from the list. The
device supports one static IPv6 default router. Dynamic default routers are routers that have
sent router advertisements to the device IPv6 interface.
When adding or deleting IP addresses, the following events occur:
• When removing an IP interface, all the default router IP addresses are removed.
Dynamic IP addresses cannot be removed.
• An alert message appears after an attempt is made to insert more than a single user-
defined address.
• An alert message appears when attempting to insert a non-link local type address,
meaning 'fe80:'.
To define a default router:
1. Click Configuration > IP Interface > IPv6 > Default Routers.
Default Router IPv6 Address—Link local IP address of the default router.
•
• IPv6 Interface—Outgoing IPv6 interface where the default router resides.
• State—Whether route is reachable or unreachable.
131