Table of Contents
Advertisement
•
Telnet—Users requesting access to the device that meets the Telnet access
profile criteria are permitted or denied access.
•
HTTP— Users requesting access to the device that meets the HTTP access profile
criteria, are permitted or denied.
•
Secure HTTP (HTTPS)—Users requesting access to the device that meets the
HTTPS access profile criteria, are permitted or denied.
•
SNMP—Users requesting access to the device that meets the SNMP access
profile criteria are permitted or denied.
•
Access Control—Select the action attached to the rule. The options are:
o Permit—Permits access to the device if the user matches the settings in
the profile.
o Deny—Denies access to the device if the user matches the settings in the
profile.
•
Interface—Select the interface attached to the rule. The options are:
o All—Applies to all ports, VLANs, and LAGs.
o Port—Rule applies to ports.
o LAG—Rule applies to LAGs.
o VLAN—Rule applies to VLANs.
•
Source IP Address—Select the type of source IP address to which the access
profile applies. The Source IP Address field is valid for a subnetwork. Select one of
the following values:
o All—Applies to all types of IP addresses.
o User Defined—Applies to only those types of IP addresses defined in the
fields.
•
IP Version—Enter the version of the source IP address: Version 6 or Version 4.
•
IP Address—Enter the source IP address.
•
IP Subnet Mask—Select the format for the subnet mask for the source IP address,
and enter a value in one of the fields:
o Network Mask—Select the subnet to which the source IP address belongs
and enter the subnet mask in dotted decimal format.
o Prefix Length—Select the Prefix Length and enter the number of bits that
comprise the source IP address prefix.
7. Click Apply. The access profile is written to the Running Configuration file. You can now
select this access profile as the active access profile.
149
Hide quick links:
Advertisement
Table of Contents
