Ipv6 Routes - Linksys LGS308 User Manual

• Type — The default router configuration that includes the following options:
• Static—The default router was manually added to this table through the Add
button.
• Dynamic—The default router was dynamically configured.
2. Click Add to add a static default router.
3. Enter the following fields:
• IPv6 Interface—Displays the outgoing Link Local interface.
Default Router IPv6 Address—The IP address of the default router
•
4. Click Apply. The default router is saved to the Running Configuration file.

IPv6 Routes

The IPv6 Forwarding Table contains the various routes that have been configured. One of these
routes is a default route (IPv6 address:0) that uses the default router selected from the IPv6
Default Router List to send packets to destination devices that are not in the same IPv6 subnet as
the device. In addition to the default route, the table also contains dynamic routes that are ICMP
redirect routes received from IPv6 routers by using ICMP redirect messages. This could happen
when the default router the device uses is not the router for traffic to which the IPv6 subnets that
the device wants to communicate.
To view IPv6 routes:
1. Click Configuration > IP Interface > IPv6 > IPv6 Routes.
This page displays the following fields:
• IPv6 Subnet Address—The IPv6 subnet address.
• Prefix Length—IP route prefix length for the destination IPv6 subnet address. It is
preceded by a forward slash.
• IPv6 Interface—Interface used to forward the packet.
132