Menu Map (Rgbw Fixtures) - Iluminarc Ilumipod 42 IP Optic Series User Manual

Operation

Menu Map (RGBW Fixtures)

st
1 Level
STAT
AUTO
RUN
dMX
PERS
Id
EDIT
SET
CAL1
CAL2
KEY
14
Programming Levels
R (red)
G (green)
b (blue)
w (white)
ST (strobe)
AT.1~10
PR.1~10
dMX
SLAV
d.001~512
TOUR
ARC.1
AR1.D
ARC.2
AR2.d
AR2.S
HSV
Id.01~66
PR. SC.
01~10 01~30
UPLd (upload)
REST (reset)
Id (ID addressing)
COLO
(color calibration)
dIM
(dimmer speed)
R (red)
wT.01~11 G (green)
(White
b (blue)
temperature)
w (white)
R (red)
RGbw
G (green)
(RGB to white)
b (blue)
ON/OFF
Combines red, green, blue, and white to form a
000~255
custom color
00~20 Strobe frequency (0~20 Hz)
Selects any of the 10 auto programs
Selects any of the 10 custom (editable) programs
Operates with a DMX controller
Operates with a master fixture
Sets the DMX starting address
11 channels (RGBW, D, S, CM, A, AS, DS, ID)
3 channels (RGB)
4 channels (RGB, D)
4 channels (RGBW)
5 channels (RGBW, D)
6 channels (RGBW, D, S)
3 channels (hue, saturation, value)
Assigns an ID address to the fixture
R (red)
G (green) Combines red, green, blue, and white to form a
000~255
b (blue) custom color
w (white)
Sb (strobe) 00~20 Strobe frequency (0~20 Hz)
T (time) Step duration
000~255
F (fade) Fade duration
Uploads custom programs to another fixture
<Password>
Resets the fixture to factory settings
ON/OFF Turns ID addressing on or off
OFF Max output when RGBW faders are at 255
RGbw (RGB to white) Pre-set output when RGBW faders are at 255
UC (Universal Color) Output matches that of older fixtures
OFF Makes dimmer curve linear
Changes the dimmer curve (fast ó slow)
dIM1~4
Modifies the white temperature used in the
000~255
macros channel (TOUR, channel 6)
Modifies the white color used when SET >
000~255
COLOR > RGbw is active
Turns the password on or off
Description
Ilumipod 42 IP Optic Series User Manual Rev. 6