Table of Contents
Advertisement
4 Configuration
The fields that can be configured for MAC Address Learning are described below:
Item
From Port / To Port
State
Click Apply to make the configurations take effect.
L2 Features > FDB > MAC Address Table
The MAC Address Table page allows user to view the entries listed in the MAC address table.
The fields that can be configured for MAC Address Table are described below:
Item
Port
Click Find to locate a specific entry based on the information entered.
Click Select All to select all dynamic MAC addresses.
Click Clear All to clear all dynamic MAC addresses.
L2 Features > VLAN > 802.1Q VLAN
A Virtual Local Area Network (LAN) is a group of ports that can be anywhere in the network, but
communicate as though they were in the same area.
VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such
as e-mail), or multicast groups (multimedia applications such as video conferencing), and therefore help to
simplify network management by allowing users to move devices to a new VLAN without having to change
any physical connections.
Figure 4.26 – L2 Features > FDB > MAC Address Table Settings
Description
Enter the appropriate port range used for the configuration.
Use the drop-down menu to toggle between Enabled and
Disabled. Default is Disabled.
Table 4.13
Figure 4.27 – L2 Features > FDB > MAC Address Table
Description
Select a single port or all ports. The information for the port(s) will
be displayed in the information table.
Table 4.14
NOTE: When viewing the different FDB pages,
the device will take a moment to refresh the UI.
D-Link Smart Managed Switch User Manual
24
Hide quick links:
Advertisement
Table of Contents
