Accessories And Options; Sniffer Line Sl200; Toolbox; Helium Bottle Holder - Inficon UL5000 Technical Handbook

1.4.2

Accessories and Options

1.4.2.1

Sniffer line SL200

1.4.2.2

Toolbox

1.4.2.3

Helium Bottle Holder

1.4.2.4

ESD Mat

16
General Information
The following parts can be ordered additionally:
• Sniffer Line SL200
• Adapter 40 / 25KF (required to connect SL200)
• Tool Box (detachable)
• Helium Bottle Holder
• ESD Mat
• Remote control in two versions:
– RC1000C wired
– RC1000WL wireless
Extension Cable, 10 m
• Spray gun with hose
• Set of plugs
• Leak Ware (software package)
By use of the sniffer line the UL5000 can easily be converted to a sniffer leak
detector. The length of the sniffer line is 4m (i.e. 12 feet).
The toolbox is a detachable compartment with a lockable lid. Fittings and small
fixtures can be stored plus the hand set (See Chapter 1.4.2.5). The storage volume
is approximately 5 l.
The toolbox is placed on the working surface and jammed by the handle.
The helium bottle holder allows you to carry a helium reservoir and a spray gun with
the UL5000. Only small and midsize bottles (max 10 l, 200 bar) will fit without influ-
encing the stability of the UL5000.
This mat is put on the working surface of the UL5000 and is clamped and grounded
by the inlet port ring. It avoids electrical discharges between the working surface and
sensitive test parts.
14005
211-283
551-000
551-001
551-002
551-010
551-015
14022
16555
20099024
14090