Flashforge Finder User Manual page 60

on the build area. Click [Back] and double-click the Move icon again, then click [On
the Platform] [Center]
and to ensure the model be on the platform.
7-4
Note：If you've place your model in a right place, you can skip the step above.
(7-5) Click the [Print] icon on the top, you should make some setups for your print
job.
7-5
Preview: If you check the [Preview]
box, you can preview your model after slicing is
Finder User Guide | www.flashforge.com 400-699-1063
60