Sas Port Control Page (Hp Bridged); Table 4-43 Sas Port Control Page - Oracle StorageTek SL150 Reference Manual

Mode Select (10)

SAS Port Control Page (HP Bridged)

TABLE 4-43

TABLE 4-43 SAS Port Control Page

Byte 7
0 PS (0)
1
2 RSVD
3
4 (MSB)
to
5
6 (MSB)
to
7
8 (MSB)
to
9
10 (MSB)
to
15
Serial Attached SCSI Port Control Page Definitions:
PS
SPF
Page Code
Protocol Identifier
Continue AWT
BAE
Ready LED Meaning
90 SL150 Interface Reference Manual
shows the format of the Serial Attached SCSI (SAS) Port Control page.
6 5
SPF (0)
Continue BAE
AWT
I_T Nexus Loss Time
Initiator Response Timeout
Reject to Open Limit
The parameters Saveable bit is set to 0.
The library returns a value of:
0 = SubPage Format bit, indicating page_0 format is being used.
This field is set to:
19h = identifies the page as the SAS Port Control mode page.
This field is set to:
06h = indicates the Serial Attached SCSI protocol.
Continuous Arbitration Wait Time (AWT)
0 = The SAS port shall stop the AWT timer and set the AWT timer to zero
when it receives an OPEN_REJECT (RETRY).
1 = The SAS port shall not stop the AWT timer and shall not set the AWT
timer to zero when the SAS port receives an OPEN_REJECT (RETRY).
Broadcast Asynchronous Event (BAE). The device server shall:
0 = Disable origination of Broadcast (Asynchronous Event).
1 = Enable origination of Broadcast (Asynchronous Event).
The Ready LED Meaning bit specifies the READY LED signal behavior.
Bit
4 3
Page Code (19h)
Page Length (0Eh)
LED Protocol Identifier (6h)
Reserved
Reserved (00h)
2 1
(LSB)
(LSB)
(LSB)
(LSB)
Julyl 2017
0