Table of Contents
Advertisement
XT65/XT75 Hardware Interface Overview
1.3 Regulatory and Type Approval Information
Table 3: Standards of European type approval
GCF-CC V3.21.0
ETSI EN 301 489-1
V1.4.1
ETSI EN 301 489-7
V1.2.1 (2000-09)
IEC/EN 60950-1 (2001)
Table 4: Requirements of quality
IEC 60068
DIN EN 60529
1.3.2
SAR requirements specific to portable mobiles
Mobile phones, PDAs or other portable transmitters and receivers incorporating a GSM module must be in accor-
dance with the guidelines for human exposure to radio frequency energy. This requires the Specific Absorption
Rate (SAR) of portable XT65/XT75 based applications to be evaluated and approved for compliance with
national and/or international regulations.
Since the SAR value varies significantly with the individual product design manufacturers are advised to submit
their product for approval if designed for portable use. For European and US markets the relevant directives are
mentioned below. It is the responsibility of the manufacturer of the final product to verify whether or not further
standards, recommendations or directives are in force outside these areas.
Products intended for sale on US markets
ES 59005/ANSI C95.1 Considerations for evaluation of human exposure to Electromagnetic Fields (EMFs)
Products intended for sale on European markets
EN 50360
IMPORTANT:
Manufacturers of portable applications based on XT65/XT75 modules are required to have their final product cer-
tified and apply for their own FCC Grant and Industry Canada Certificate related to the specific portable mobile.
See also
Section
8.2.
XT65_XT75_HO_v00.130
Confidential / Preliminary
Global Certification Forum - Certification Criteria
Candidate Harmonized European Standard (Telecommunications series) Electro
Magnetic Compatibility and Radio spectrum Matters (ERM); Electro Magnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
Technical Requirements
Candidate Harmonized European Standard (Telecommunications series) Electro
Magnetic Compatibility and Radio spectrum Matters (ERM); Electro Magnetic
Compatibility (EMC) standard for radio equipment and services; Part 7: Specific
conditions for mobile and portable radio and ancillary equipment of digital cellular
radio telecommunications systems (GSM and DCS)
Safety of information technology equipment (2000)
Environmental testing
IP codes
from Mobile Telecommunication Equipment (MTE) in the frequency range
30MHz - 6GHz
Product standard to demonstrate the compliance of mobile phones with the basic
restrictions related to human exposure to electromagnetic fields (300MHz - 3GHz)
Page 11 of 67
s
2006-10-12
Advertisement
Table of Contents
