Zoom; Focus; Stop - Sony CH140 Application Manual

Application Guide

4.1.1.2 Zoom

PTZ
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=value,value

4.1.1.3 Focus

PTZ
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=value,value
EX101 EX101E
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=value,value

4.1.1.4 Stop

PTZ
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?Move=stop,value
Sony Network Camera
ZP550 ZR550 EX101 EX101E EX104
Parameter Value
tele or wide
Move
1 to 8 (low <-> high)
ZP550 ZR550
Parameter Value
near, far, or
onepushhaf
Move
1 to 8
EX104 EX154
Parameter Value
near, or far
Move
1 to 8
ZP550 ZR550 EX101 EX101E EX104
Parameter
stop
Move
pantilt (or motor), zoom, or focus
Pan/Tilt/Zoom/Focus
EX154
Sets the camera zoom to tele or wide.
Sets the zoom speed in the range of 1 to 8.
Sets the camera focus to near, far or onepushhaf.
Note that "onepushhaf" is enabled only when the
"Focus mode" parameter is set to "manual" using
"camera.cgi".
(* Note that this value will be disabled even if set
to 1 to 8.)
Sets the camera focus to near or far.
(* Note that this value will be disabled even if set
to 1 to 8.)
EX154
Value
Specifi es the mode to be stopped.
6
Description
Description
Description
Description
June, 2013 / V3.1