Removing The Top Panel Assembly - JVC FS-Y1 Service Manual

3.1.2 Removing the top panel assembly

(See Figs.5 to 6)
• Remove the side panels L/R.
(1) From the front side of the main body, pull out the volume
knob assembly in the direction of the arrow. (See Fig.5.)
(2) Remove the two screws C and remove the volume orna-
ment. (See Fig.5.)
(3) From the both sides of the main body, remove the two
screws D, two screws E and screw F. (See Figs.5 and 6)
Reference:
When attaching the screw F, attach the earth wire with it.
(See Fig.6.)
(4) Remove the screw G attaching the top panel assembly.
(See Fig.6.)
(5) Release the joints b and remove the joints c in the direction
of the arrow. (See Figs.5 and 6.)
(6) Disconnect the card wire from the connector
micom board while lifting the top panel assembly. (See
Fig.5.)
Volume knob assembly
CN427 on the
C
Volume ornament
Top panel assembly
Top panel assembly
D
CN427
c
C
Fig.5
Top panel assembly
G
E
Earth wire
b
Fig.6
E
b
Micom board
D
c
F
(No.MB376)1-7