Elation ZCL BAR Z300 IP User Manual page 12

CLAMP INSTALLATION
The fixture provides an integrated adjustable yoke with rotating floor stands. When
mounting this fixture to truss, (2) Omega Brackets (optional not included) are
required. Be sure to secure appropriately rated clamps to the Omega Brackets. Be
sure to attach an appropriate
safety cable rigging points integrated in the fixture.
RIGGING
Overhead rigging requires extensive experience, including amongst others
calculating working load limits, installation material being used, and periodic safety
inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily
injury. Fixture is fully operational in the specific mounting positions illustrated below.
w w w . e l a t i o n l i g h t i n g . c o m
Safety Cable (not included)
WHENEVER INSTALLING THIS FIXTURE
IN A SUSPENDED ENVIRONMENT TO
ENSURE THE FIXTURE WILL NOT DROP
12
to the fixture using the
S A F E T Y C A B L E
ALWAYS USE A SAFETY CABLE
IF THE CLAMPS FAILS.
ZCL BAR Z300 IP™ User Manual