Hold On Scan Mode; Installing The Programming Software Onto A Laptop, Or Pc; Creating A New Personality - Park Air T6M User Manual

Table of Contents

Advertisement

Hold on Scan Mode

When in scan mode, what happens after a busy channel is found depends on how the radio is
programmed. There are two possible options: Hold and Pause.
If Hold is programmed, the radio remains tuned to the busy channel until the CH
q
pressed to resume scanning.
If pause is programmed, the radio remains tuned to the busy channel for six seconds, then
q
automatically resumes scanning. If during the six seconds the radio is keyed, or the CH
is pressed, the radio remains tuned to the busy channel; scanning does not resume until the
CH
button is pressed again.

INSTALLING THE PROGRAMMING SOFTWARE ONTO A LAPTOP, OR PC

The programming software is supplied on a CD-ROM. The software should be installed onto a laptop
computer, or PC, running Windows™ 95 or 98. To install the software:
(1)
Insert the CD-ROM into the computer's CD drive.
(2)
From Windows Explorer, select the CD-ROM drive, and run the programme called
Setup.exe.
(3)
Follow the on-screen instructions. The programming files are stored in the directory
C:\Program Files\PAE unless a different directory is specified during installation. Icons, and
an uninstall programme are automatically created during installation.

CREATING A NEW PERSONALITY

This procedure creates a new personality for use by the radio. The personality includes all channel
frequencies, operating modes and programmable options that are required when the radio is in
operational use. When the personality has been compiled, it can be loaded into the radio's memory by
connecting the laptop (or PC) to the radio using the programming lead.
To create a new personality:
(1)
At the laptop (or PC) run the PAE programmer software. Check that the General page (see
page 41) is displayed. If the Frequencies page is displayed, select the General tab.
(2)
From the menu-bar select File then New. This action resets all options to the default value
and clears all entries, except one, in the frequency table.
T6M Base Station User Guide
Page 40
button is
button

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Park Air T6M

Table of Contents