Connecting An Ac Input Supply; Connecting A Pc To The Base Station - Park Air T6M User Manual

CONNECTING AN AC INPUT SUPPLY

An ac input supply must be connected to the base station using the supply connector provided (Table 3,
item 3). The free end of the cable should be terminated with a connector suitable for the local mains
supply.
The T6M base station is a class 1 equipment. The ac supply cable must have a green-and-yellow
protective earthing conductor electrically connected to the protective earthing terminal of the equipment
connector, and the supply output connector.
The ac supply cable should be colour coded in accordance with the electrical appliance (colour code)
regulations for the UK. That is:
Line:
Neutral:
Earth:
Connections are shown below.

CONNECTING A PC TO THE BASE STATION

To modify the base
Microphone/Diagnostics connector and is replaced by an RS232 cable connected to a laptop, or PC. The
cable is part of the T6M programming kit, part number 70-T6MPMKIT. Figure 4 shows the connections
used for the RS232 cable.
T6M Base Station User Guide
Page 36
Brown
Blue
Green-and-yellow
Base Station's Chassis AC Connector
station's personality, the microphone is disconnected from the