Hilti UD 4 Manual
Hide thumbs
Also See for UD 4:
- Original operating instructions (100 pages) ,
- Manual (82 pages) ,
- Service instructions manual (3 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Hilti UD 4
Summary of Contents for Hilti UD 4
- Page 1 UD 4 English Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...
- Page 2 Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...
- Page 3 Protection class II (double-insulated) 1.4 Product information Hilti products are designed for professional use and may be operated, serviced and maintained only by trained, authorized personnel. This personnel must be informed of any particular hazards that may be encountered. The product and its ancillary equipment can present hazards if used incorrectly by untrained personnel or if used not in accordance with the intended use.
- Page 4 ▶ Write down the serial number in the table below. You will be required to state the product details when contacting Hilti Service or your local Hilti organization to inquire about the product. Product information Drill UD 4 Generation: Serial no.: 1.5 Declaration of conformity...
- Page 5 ▶ Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. ▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 6 ▶ Do not touch rotating parts – risk of injury! ▶ Wear suitable protective glasses, a hard hat, ear protection, protective gloves and light respiratory protection while using the power tool. ▶ Wear protective gloves also when changing the tool. Touching the accessory tool can result in cuts and burns.
- Page 7 3 Description 3.1 Product overview English Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...
- Page 8 The product described is an electric drill. It is designed for drilling in steel, wood and plastic and for driving and removing screws. 3.3 Items supplied Electric drill, operating instructions. You can find other system products approved for use with your product at your local Hilti Center or online at: www.hilti.group. 4 Technical data 4.1 Drill Note For details of the rated voltage, frequency, current and input power, please refer to the power tool’s...
- Page 9 4.1.2 Using extension cords WARNING A damaged supply cord presents a hazard! Do not touch the supply cord or extension cord if damaged while working. Disconnect the supply cord plug from the power outlet. ▶ Check the appliance’s supply cord at regular intervals and have it replaced by a qualified specialist if found to be damaged.
- Page 10 2. Check that the connection end of the accessory tool is clean and then insert it in the keyed chuck or, respectively, pull the accessory tool out of the keyed chuck. 3. Use the chuck key to close the keyed chuck. 4.
- Page 11 2. Press the lockbutton for continuous operation. ◁ The product is now in continuous operation mode. 3. To switch off continuous operation, press the control switch. 4. Release the control switch. ◁ The product switches off. 6.4 Direction of rotation ▶...
- Page 12 2. Disconnect the electric drill from the electric supply. 3. Use the chuck key to open the chuck. 4. To release the screw in the chuck, insert a hexagon steel rod in the head of the screw in the chuck. 5.
- Page 13 1. You require the following items: Materials Supply cord 2167712 (110 V GB) 2167713 (230 V GB) 2167714 (230 V CH) 2167715 (120 V US) 2167717 (230 V CN) 2188143 (230 V EU) Screwdriver (combi Torx) 2. Disconnect the electric drill from the electric supply. 3.
- Page 14 1. You will need the following items: Materials Carbon brushes 2167718 Long-nose pliers Screwdriver (flat) Screwdriver (combi Torx) 2. Disconnect the electric drill from the electricity supply. 3. Unscrew the casing screws and remove the casing. 4. Note how the wires and the carbon brushes are fitted. 5.
- Page 15 17. Place the bottom carbon brush in the bottom cage. Note Make sure that no wires are trapped. The carbon brushes and the wires have to be fitted exactly as they were before replacement. 18. Place the casing in position and insert and tighten the casing screws. Technical data Torque (Casing) 1.35 Nm …1.75 Nm...
- Page 16 To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com 9 Transport and storage •...
- Page 17 There is a link to the RoHS table, in the form of a QR code, at the end of this document. 12 Manufacturer’s warranty ▶ Please contact your local Hilti representative if you have questions about the warranty conditions. English...
- Page 18 English Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...
- Page 19 Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...
- Page 20 Hilti = registered trademark of Hilti Corp., Schaan 20170725 Printed: 03.08.2017 | Doc-Nr: PUB / 5358787 / 000 / 02...