Table of Contents
Advertisement
6. SETTING THE PAPER
6.1 Setting the Paper
1.
Tear off straight the leading edge of the paper (roll paper).
2.
Make sure you set the paper in the direction of the following figure, and insert the paper to
the paper guide.
GOOD
I
NG
Fig. 6-1 Positions of adjust lever
3.
Turn the feed motor, and turn on the solenoid to feed the paper.
4.
When the paper comes out of the paper outlet, turn the feed motor off, and stop the paper
feed.
Caution: The roll paper has a mark that gives you a Paper-out notice. When you notice this mark,
set the new roll
6.2 Removing the Paper
1. Tear the paper behind
paper.
the paper guide.
2.
Turn the feed motor to remove the paper.
Caution: If snatched out manually, the paper may become askew, causing it to be jammed inside
the printer.
-28-
Advertisement
Table of Contents
