Rhu-T500 (Large Paper Roll Holder) - Star TUP500 Integration Manual

RHU-T500
Vertical Layout
When using the RHU-T500 the vertical layout, it is necessary to mount the printer to the RHU-T500. Use the printer unit holes (a, b, c and d) and the
RHU-T500 unit holes (a, b, c and d) to join the units together. When doing so, align A with A, b with b, and so on. Once the two units are joined, use the
holes (A, B, C and D) shown below to secure the entire unit.
Horizontal Layout
Use the four holes (A, B, C and D) shown in figure below to secure the RHU-T500.