The Starter Kill And The Anti-Grind Feature; Extended Run Time; Advanced Features: Installation-Programmable Options - Autostart AS-3472TW-FM User Manual

The parking lights flash three times.
To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine by remote.
•
Turn the ignition key to the
•
Press and release the
You will hear a beep.
L-01 will appear on the display.
•
Within 3 seconds, press and hold the
The remote control will beep once, then once again when the
disappears.
The parking lights flash once.
To verify whether the system is in Cold Weather Mode (automatic transmissions only):
•
Press the brake pedal:
•
If the vehicle is in cold weather mode, the parking lights will stay on while the
pedal is pressed.

The Starter Kill and the Anti-grind Feature

With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the starter kill is armed. If your remote starter was installed with the starter kill option,
one will not be able to start your vehicle with the key unless the system has been unlocked and
disarmed first, or put into valet mode.
Note: If the starter kill is installed, your vehicle will benefit from a protection against starter
motor damage that could occur after remote-starting the engine should the user, by force of
habit, turn the ignition key to the

Extended Run Time

With the vehicle running under a remote start, pressing and holding the
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning:
•
Press and hold the
The transmitter will beep once.
•
Keep pressing on the
•
Release the
time.
The parking lights will flash 3 times slowly to confirm the extended run time
(the horn will also honk once if the horn option is configured).
To stop the vehicle, at any moment, simply press the
be carried out once per remote start.
Example: If your Module is programmed for a run time of 3 minutes and your vehicle has been
running for 2 minutes already, pressing the
Engine will run for another cycle (in this case, 3 minutes).

Advanced Features: Installation-programmable Options

The remote car starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your Remote Car Starter. Please note that the
following programmable options may require additional parts and labor.
P. 12
IGNITION ON (RUN)
button.
position.
CRANK
button for more than 3 seconds.
START/STOP
START/STOP
button. The run time will be reset to the pre-programmed run
START/STOP
START/STOP
position.
button for at least 3 seconds.
button until the transmitter beeps 3 times.
START/STOP
button will reset the counter to zero and the
button for more
START/STOP
button. This procedure can only
icon
User Guide