11.5.2 Viewing the connection with home network
1 Check that
or
2 Press
MENU
to enter the menu screen.
3
4
2
3 Use
or
and
> The display shows: System, Wireless and Wired.
3
4
2
4 Use
or
and
• Wi-Fi: information about the Wi-Fi settings.
• Ethernet: information about the Ethernet settings.
11.6
Connect to Internet
Important! Make sure that no dial-up, user name or password is required for the Internet
access.
Check that you have connected
to an ADSL modem with internet access directly.
Set DNS and Gateway
If you are using a DHCP* enabled Access Point, Router or ADSL modem, the DNS and
Gateway can be obtained automatically, so you need only to set
(DHCP):
1 Press MENU.
3
4
2
2 Use
or
and
3 Select Wired or Wireless.
3
4
2
4 Use
or
and
*
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
Network settings
is in HD source.
to enter Information menu.
to select Wireless or Wired.
to an Access Point or Router with Internet access or connect
to select Settings followed by Network.
to select Automatic (DHCP).
to Automatic
77