Table of Contents
Advertisement
4.2.2
Remote control, 2-way
You can choose to use the 2-way remote control to operate either
level of interference, you can also select your preferred operational mode: Enhanced Mode or
Normal Mode.
Important! To save battery power, if no buttons are pressed for approx. 15 seconds, the 2-way
remote control enters idle mode. Press any button to reengage the control.
Center (default): to operate
Station: to operate
Enhanced Mode (default):This mode offers a better range (distance and angle). Use this mode if
there is no interference from a plasma TV nearby.
Normal Mode: Choose this mode if there is interference from a plasma TV nearby that is
distorting the display of the 2-way remote control.
1 Press & hold
REFRESH
remote control.
3
4
2 Use
or
to highlight and
3
4
3 Use
or
to highlight and
4 Confirm with OK.
Tip
• Avoid placing
or
way remote control.
• The status of
or
easier to operate the remote control.
• To synchronize the remote control display after activating the
REFRESH
on the remote control of Center.
Prepare
until the Select Device screen appears in the display of the 2-way
2
to select Center or Station.
2
to select Normal Mode or Enhanced Mode.
near a plasma TV.The interference may distort the display on your 2-
is synchronized into the display of the 2-way remote control, so it is
or
. Depending on the
y
button on the set, press
31
Advertisement
Table of Contents
