Table of Contents
Advertisement
11.4
Connect to two different home networks
WACS7500 can be added into two different home networks via wired and wireless network ports.
Note that the IP addresses of the two different network ports cannot be in one subnet:WACS7500
has no router function and cannot determine which port to use.
Note
Once
is added to the Wi-Fi network, all Wi-Fi ad-hoc connections with the WAC7500 will be
shut down.
Applicable if you have two home networks.
Once a
is added to the Wi-Fi (wireless) home network, the Wi-Fi wireless connection of this
particular
to the
connection with one or more other
WACS7500 cannot shadow the IP of a network device that is not activated. Please be careful of the
IP address settings to avoid IP address conflict between the wired and Wi-Fi ports.
11.5
View connection status
11.5.1 View Station (
1 Check that
2 Press
MENU
to enter the menu screen.
3
4
3 Use
or
and
3
4
4 Use
or
and
> A list of connected
2
5 Press
to view the connection information.
76
will be shut down. However
.
) status in Wi-Fi network of Center (
is in HD source.
2
to enter Station Management (Mgnt) menu.
2
to select Station Status.
or previously connected
may still maintain its Wi-Fi ad-hoc
is displayed on the
)
.
Network settings
Advertisement
Table of Contents
