Connect To Your Home Wi-Fi Network For Airplay; Method 1: Use Ios5 Wi-Fi Network Login Sharing - Philips AD7050W User Manual

4 Connect to
your home Wi-
Fi network for
AirPlay
To connect AD7050W to your existing
home Wi-Fi network, you need to apply
your home Wi-Fi settings to AD7050W.
Choose your best setup method based
on the preconditions listed below.
Precondition
You have an iPod
touch/iPhone/
iPad upgraded to
iOS 5.0 or later.
Your Wi-Fi router is
enabled with WPS
(Wi-Fi Protected
Setup) and supports
PBC (Push Button
Connection).
EN
8
Setup method
Choose method 1
(recommended) (see
'Method 1: Use iOS5
Wi-Fi network login
sharing' on page 8).
Choose method
2 (see 'Method 2:
Connect to a WPS
router' on page 9).
You have a Wi-Fi
enabled device with
an Internet browser,
such as an iPod touch/
iPhone/iPad or a Wi-Fi
enabled PC/Mac.
Before connection of AD7050W to you
home Wi-Fi network, make sure that:
a your Wi-Fi router is powered
on and working properly.
b AD7050W has been powered on
and booted up successfully (see
'Turn AD7050W on' on page 7).
Once connected successfully, AD7050W
will remember your home Wi-Fi settings.
Then you can enjoy AirPlay whenever
AD7050W is powered on and connected
to your home Wi-Fi network automatically.
Method 1: Use iOS5 Wi-Fi
network login sharing
1
Connect your iPod touch/iPhone/iPad to
your home Wi-Fi network.
2
Connect an Apple USB cable (not
supplied) to:
the USB
•
AD7050W.
• the dock connector on
your iPod/iPhone/iPad.
Choose method
3 (see 'Method 3:
Connect to a non-
WPS Wi-Fi router'
on page 10).
socket on the back of