Table of Contents
Advertisement
6 In Set IP Mode screen: If you are using a DHCP* enabled network device, select Automatic.
*
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
11.3.2 Set network on Station (
If there is no DHCP:
1 Select Static and assign an IP address and subnet mask as prompted, using the alphanumeric
keys (see 4.4 Prepare: Alphanumeric keys).
2 As prompted, select YES to apply the settings.
>
is connected to the external wired network.
On the display, the icon
Applicable if you already have a wired home network (hub/switch/router).
Router
www
Wired
Tip
You can connect
Wireless Audio Device Manager (WADM) in the supplied PC Suite CD. For details, see section
12 Connect to your PC.
Network settings
)
changes to
.
or
directly to your PC using the supplied Ethernet cable and the
75
Advertisement
Table of Contents
