Table of Contents
Advertisement
5.2
Eco Standby (power-saving mode)
In the power-saving mode Eco Standby, the display and Wi-Fi connections of the product are turned
off.The HD (Hard Disk) of
cannot stream music between
Standby the remote controls are inactive.
1 With the set switched ON, press & hold y:
/
changes to Eco Standby.
The button lights up red.
The display is switched off.
2 To switch the
/
switches to the last source selected.
Tip
• In the power-saving mode Eco Standby, the settings for networking, sound, display, language and
CD recording, as well as the tuner presets, and the volume level (maximum: moderate level) will
be retained in the memory of the set.
• To protect the HD, always switch
mains outlet.
• Remember that the remote controls are inactive during Eco Standby.
5.3
Auto-Standby
If at the end of playback / recording (ripping) the set remains in the stop mode for longer than 20
minutes, the set will automatically switch to Standby mode in order to save power.
5.4
Volume control
1 Check that playback has started.
2 Adjust the volume with
> Display shows a horizontal bar indicating the volume level.
Basic functions
also becomes inactive.When
and
or import music from the PC to
/
ON, press
y
on the set. (The remote controls are still inactive.)
to Eco Standby before removing its power plug from the
VOL +/-
buttons.
is switched to Eco Standby, you
. During Eco
35
Advertisement
Table of Contents
