Table of Contents
Advertisement
7 As prompted, select Yes to apply the settings.
is connected to the Wi-Fi home network.
might be disconnected from the Wi-Fi network of
Tip
• To add
to the network of
Install Center
• If you change the WEP/WPA key after you have added the WACS7500 into your home network,
the connection between the WACS7500 and your home network will be lost. In this case, please
restart WACS7500
Applicable if you already have a wireless network (hub/switch/router).
Router
www
Wireless
11.2.2 Set network on Station (
1 Press
MENU
to enter the menu screen.
3
4
2
2 Use
or
and
2
3 Press
to continue.
> Display: Searching for Networks...
List of networks appears. (Network Not Found appears if no network is found.)
4 Select the Wi-Fi network where your desired UPnP device is located.
2
5 Press
to continue.
Network settings
, follow the steps under user manual section 3.1 Installation:
and Station
.
and
in order to refresh the IP update.
)
to enter Settings followed by Network, then Wireless.
.
69
Advertisement
Table of Contents
