Maintenance; Warranty; Customer Service - Klein Tools IR5 Instruction Manual

BATTERY REPLACEMENT
When indicator is displayed on LCD, battery must be replaced.
1. Open the battery compartment
compartment cover at the indentations away from the trigger.
2. Remove exhausted 9V battery and dispose of appropriately.
3. Replace 9V battery and return battery compartment cover,
ensuring that it locks into place.
Be sure meter is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents. Take care
to keep the sensor lens clean at all times. If required, loose
debris may be removed from lens using clean compressed air.
Lens may also be cleaned using a soft cloth or cotton swab
with water or rubbing alcohol only . Lens must be allowed to
completely dry prior to use.
Remove the battery when meter is not in use for a prolonged
period of time. Do not expose to high temperatures or
humidity. After a period of storage in extreme conditions
exceeding the limits mentioned in the General Specifications
section, allow the meter to return to normal operating
conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.

MAINTENANCE

CLEANING
STORAGE

WARRANTY

www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
by pulling the battery
6
9