Using Hose Clamps - Wavion WBS-2400 Installation Manual

Figure 4.2 Example Mounting Locations on a Streetlight

Using Hose Clamps

Special hose clamps that include threaded holes are used by the mounting assembly to
secure the WBS-2400/5800 to the mounting structure. Figure 4.3 demonstrate how to
correctly use the hose clamps. The bands must be threaded through holes in the pole
bracket, and then attached to either a vertical or a horizontal pole and tightened.
There are two pairs of threaded holes on the back of the unit, enabling to use the special
clamps for mounting the unit on diverse pole diameters.
Installation Guide 15